Sonos Pro-Ject Debut Carbon Esprit Turntable (Walnut)
Model# PRODCWW1WNT
- Style:
- Turntables
Make vinyl part of your Sonos experience when you connect this turntable to select products.
Compatible with Move 2, Era 100, Era 300, Five, Amp, Port, Play:5, Connect:Amp, Connect. Built-in phono preamp with RCA output One-piece 8.6 carbon fiber tonearm with sapphire bearings Precision belt drive with decoupled synchronous motor Ortofon 2M Red cartridge, pre-mounted and factory aligned Non-resonant acrylic platter Slip mat TPE motor suspension
| Audio | |
| Signal to Noise | 68 dB |
| Sampling Frequency | Up to 192 kHz |
| Phono Preamplifier | Built-in phono preamp/phono stage |
| Outputs | RCA Phono/Line (switchable) |
| Details + Dimensions | |
| Speed | 33, 45 / 78 (electronic/manual speed change) |
| Drive Principle | Belt drive |
| Platter | 300 mm acrylic platter |
| Mains Bearing | Stainless steel axle in a bronze bearing housing |
| Speed Drift | 33: 0.19% 45: 0.17 |
| Wow + Flutter | 33: 0.6% 45: 0.7% |
| Tonearm | 8.6 carbon |
| Effective Arm Length | 218.5 mm |
| Overhang | 18.5 mm |
| Tracking Force | 10 - 30 mN |
| Dimensions | Height: 4.65 in (118 mm) Width: 16.34 in (415 mm) Depth: 12.60 in (320 mm) |
| Weight | 10.8 lbs (4.9 kg) |
| Power + Connectivity | |
| A/D Converter | Asahi Kasai Microdevices, AK5552VN |
| Power Connection | 110/120 or 230/240 Volt - 50 or 60 Hz |
| Power Consumption | 7.4W max |
| Box Contents | |
| Pro-Ject Debut Carbon Turntable in Walnut (Sonos Edition) | |
| Included Accessories | 15 volts DC power supply, dust cover, anti-skating weight, Pro-Ject RCA to RCA cable (1.23 m), felt mat, round belt for 78rpm, plastic adapter for single LPs, 1.5 mm Allen key, two-point alignment protractor (template for cartridge setting), RCA to 3.5 mm adapter, documentation |
| Requirements | |
| Power Source | Nearby electrical outlet |
| Speaker | Requires speaker for audio output and a 3.5 mm line-in adapter |
Enter Your Review:
Fields marked with an asterisk (*) are required.
